AGHAZADEH, S. M. 2004. Improving logistics operations across the food industry supply chain. International Journal of Contemporary Hospitality Management, 16, 263-268.

ALI, M. & FLINN, J. C. 1989. Profit efficiency among Basmati rice producers in Pakistan Punjab. American Journal of Agricultural Economics, 71, 303-310.

ANDERSEN, M. S. 2007. An introductory note on the environmental economics of the circular economy. Sustainability Science, 2, 133-140.

ANSELMETTI, B. & LOUATI, H. 2005. Generation of manufacturing tolerancing with ISO standards. International Journal of Machine Tools and Manufacture, 45, 1124-1131.

ASSOCIATION, A. P. R. 2015. Automotive Parts Remanufacturers Association [Online]. Automotive Parts Remanufacturers Association Automotive Parts Remanufacturers Association Available: http://www.apra-europe.org/main.php?target=history [Accessed 2015].

BERGMANN, C., LINDNER, M., ZHANG, W., KOCZUR, K., KIRSTEN, A., TELLE, R. & FISCHER, H. 2010. 3D printing of bone substitute implants using calcium phosphate and bioactive glasses. Journal of the European Ceramic Society, 30, 2563-2567.

BOGUE, R. 2013. 3D printing: the dawn of a new era in manufacturing? Assembly Automation, 33, 307-311.

CASTELLANI, V., SALA, S. & MIRABELLA, N. 2015. Beyond the throwaway society: A life cycle-based assessment of the environmental benefit of reuse. Integrated Environmental Assessment and Management, 11, 373-382.

CATTANEO, O. G. G. S. C. 2010. Global Value Chains in a Postcrisis World, The World Bank.

COE, R., SINCLAIR, F. & BARRIOS, E. 2014. Scaling up agroforestry requires research ‘in’ rather than ‘for’ development. Current Opinion in Environmental Sustainability, 6, 73-77.

COHEN, A., LAVIV, A., BERMAN, P., NASHEF, R. & ABU-TAIR, J. 2009. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, 108, 661-666.

DE BEER, N. 2006. Advances in Three Dimensional Printing – state of the art and future perspectives. journal= “”, 4, 21-49

DEMIREL, H., SERTEL, E., KAYA, S. & ZAFER SEKER, D. 2008. Exploring impacts of road transportation on environment: a spatial approach. Desalination, 226, 279-288.

EPA, E. 2016. Circular Economy: Material Flow Aspects [Online]. Environmental Protection Agency Ireland. Available: https://www.epa.ie/irelandsenvironment/stateoftheenvironmentreport/graphsanddata/chapter9-economyintro/figure95circulareconomymaterialflowaspects/ [Accessed 19/04/17 2017].

FANG, K., UHAN, N., ZHAO, F. & SUTHERLAND, J. W. 2011. A new approach to scheduling in manufacturing for power consumption and carbon footprint reduction. Journal of Manufacturing Systems, 30, 234-240.

FEDOROVICH, N. E., ALBLAS, J., HENNINK, W. E., ÖNER, F. C. & DHERT, W. J. A. 2011. Organ printing: the future of bone regeneration? Trends in Biotechnology, 29, 601-606.

FISCHWEICHER, S. 2014. Could 3-D Printing Bring the World Closer to the Circular Economy?  . In: MAZZONI, M. (ed.). www.triplepundit.com: Bard College MBA.

GENG, Y., FU, J., SARKIS, J. & XUE, B. 2012. Towards a national circular economy indicator system in China: an evaluation and critical analysis. Journal of Cleaner Production, 23, 216-224.

GEREFFI, G., HUMPHREY, J., KAPLINSKY, R. & STURGEON*, T. J. 2001. Introduction: Globalisation, Value Chains and Development. IDS Bulletin, 32, 1-8.

GERVASIO, H. & DA SILVA, L. 2008. Comparative life-cycle analysis of steel-concrete composite bridges. Structure and Infrastructure Engineering, 4, 251-269.

GHISELLINI, P., CIALANI, C. & ULGIATI, S. 2016. A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems. Journal of Cleaner Production, 114, 11-32.

GILL, S. S. & KAPLAS, M. 2009. Comparative Study of 3D Printing Technologies for Rapid Casting of Aluminium Alloy. Materials and Manufacturing Processes, 24, 1405-1411.

GODOI, F. C., PRAKASH, S. & BHANDARI, B. R. 2016. 3d printing technologies applied for food design: Status and prospects. Journal of Food Engineering, 179, 44-54.

GUMMERT, M. IMPROVED POSTHARVEST TECHNOLOGIES AND MANAGEMENT FOR REDUCING POSTHARVEST LOSSES IN RICE. 2013. International Society for Horticultural Science (ISHS), Leuven, Belgium, 63-70.

GUMMERT, M., PHAN, H., MEAS, P., RICKMAN, J., SCHMIDLEY, A. & PANDEY, S. 2010. Emerging technological and institutional opportunities for efficient post-production operations. Rice in the Global Economy: Strategic Research and Policy Issues for Food Security. Los Baños (Philippines): IRRI, 333-355.

HARDING, K. G., DENNIS, J. S., VON BLOTTNITZ, H. & HARRISON, S. T. L. 2007. Environmental analysis of plastic production processes: Comparing petroleum-based polypropylene and polyethylene with biologically-based poly-β-hydroxybutyric acid using life cycle analysis. Journal of Biotechnology, 130, 57-66.

HAUSCHILD, M. 2000. 22. Estimating pesticide emissions for LCA of agricultural products. Agricultural data for life cycle assessments, 70.

JACOBSEN, N. B. 2006. Industrial Symbiosis in Kalundborg, Denmark: A Quantitative Assessment of Economic and Environmental Aspects. Journal of Industrial Ecology, 10, 239-255.

JUN, H. & XIANG, H. 2011. Development of Circular Economy Is A Fundamental Way to Achieve Agriculture Sustainable Development in China. Energy Procedia, 5, 1530-1534.

KALTSCHMITT, M., REINHARDT, G. A. & STELZER, T. 1997. Life cycle analysis of biofuels under different environmental aspects. Biomass and Bioenergy, 12, 121-134.

LAM, C. X. F., MO, X. M., TEOH, S. H. & HUTMACHER, D. W. 2002. Scaffold development using 3D printing with a starch-based polymer. Materials Science and Engineering: C, 20, 49-56.

LEIGH, S. J., BRADLEY, R. J., PURSSELL, C. P., BILLSON, D. R. & HUTCHINS, D. A. 2012. A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors. PLOS ONE, 7, e49365.

LI, X., WANG, C., ZHANG, W. & LI, Y. 2009. Fabrication and characterization of porous Ti6Al4V parts for biomedical applications using electron beam melting process. Materials Letters, 63, 403-405.

LIEDER, M. & RASHID, A. 2016. Towards circular economy implementation: a comprehensive review in context of manufacturing industry. Journal of Cleaner Production, 115, 36-51.

LIPSON, H. & KURMAN, M. 2013. Fabricated: The new world of 3D printing, John Wiley & Sons.

MACARTHUR, E. 2013. Towards the circular economy. J. Ind. Ecol.

MARIANO, M. J., VILLANO, R. & FLEMING, E. 2012. Factors influencing farmers’ adoption of modern rice technologies and good management practices in the Philippines. Agricultural Systems, 110, 41-53.

MATHEWS, J. A. & TAN, H. 2011. Progress Toward a Circular Economy in China. Journal of Industrial Ecology, 15, 435-457.

MCCLEESE, D. L. & LAPUMA, P. T. 2002. Using monte carlo simulation in life cycle assessment for electric and internal combustion vehicles. The International Journal of Life Cycle Assessment, 7, 230-236.

MICHALSKI, M. H. & ROSS, J. S. 2014. The shape of things to come: 3d printing in medicine. JAMA, 312, 2213-2214.

MURRAY, A., SKENE, K. & HAYNES, K. 2017. The Circular Economy: An Interdisciplinary Exploration of the Concept and Application in a Global Context. Journal of Business Ethics, 140, 369-380.

ODEH, N. A. & COCKERILL, T. T. 2008. Life cycle analysis of UK coal fired power plants. Energy Conversion and Management, 49, 212-220.

PEARCE, D. & TURNER, K. 1990. Natural resource and environmental economics, Johns Hopkins University Press Baltimore.

PENNINGTON, D. W., POTTING, J., FINNVEDEN, G., LINDEIJER, E., JOLLIET, O., RYDBERG, T. & REBITZER, G. 2004. Life cycle assessment Part 2: Current impact assessment practice. Environment International, 30, 721-739.

PERUGINI, F., MASTELLONE, M. L. & ARENA, U. 2005. A life cycle assessment of mechanical and feedstock recycling options for management of plastic packaging wastes. Environmental Progress, 24, 137-154.

PHAM, D. T. & GAULT, R. S. 1998. A comparison of rapid prototyping technologies. International Journal of Machine Tools and Manufacture, 38, 1257-1287.

RAMESH, T., PRAKASH, R. & SHUKLA, K. K. 2010. Life cycle energy analysis of buildings: An overview. Energy and Buildings, 42, 1592-1600.

RATTO, M. & REE, R. 2012. Materializing information: 3D printing and social change. 2012.

REBITZER, G., EKVALL, T., FRISCHKNECHT, R., HUNKELER, D., NORRIS, G., RYDBERG, T., SCHMIDT, W. P., SUH, S., WEIDEMA, B. P. & PENNINGTON, D. W. 2004. Life cycle assessment: Part 1: Framework, goal and scope definition, inventory analysis, and applications. Environment International, 30, 701-720.

SPIELMANN, M. & SCHOLZ, R. 2005. Life Cycle Inventories of Transport Services: Background Data for Freight Transport (10 pp). The International Journal of Life Cycle Assessment, 10, 85-94.

STYLES, D. & JONES, M. B. 2007. Energy crops in Ireland: Quantifying the potential life-cycle greenhouse gas reductions of energy-crop electricity. Biomass and Bioenergy, 31, 759-772.

SUN, J., ZHOU, W., HUANG, D., FUH, J. Y. H. & HONG, G. S. 2015. An Overview of 3D Printing Technologies for Food Fabrication. Food and Bioprocess Technology, 8, 1605-1615.

SUN, K., WEI, T.-S., AHN, B. Y., SEO, J. Y., DILLON, S. J. & LEWIS, J. A. 2013. 3D Printing of Interdigitated Li-Ion Microbattery Architectures. Advanced Materials, 25, 4539-4543.

UPCRAFT, S. & FLETCHER, R. 2003. The rapid prototyping technologies. Assembly Automation, 23, 318-330.

WALTHER, G.-R., POST, E., CONVEY, P., MENZEL, A., PARMESAN, C., BEEBEE, T. J. C., FROMENTIN, J.-M., HOEGH-GULDBERG, O. & BAIRLEIN, F. 2002. Ecological responses to recent climate change. Nature, 416, 389-395.

WILLIAMS, J. M., ADEWUNMI, A., SCHEK, R. M., FLANAGAN, C. L., KREBSBACH, P. H., FEINBERG, S. E., HOLLISTER, S. J. & DAS, S. 2005. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomaterials, 26, 4817-4827.

YANG, J., XU, M., ZHANG, X., HU, Q., SOMMERFELD, M. & CHEN, Y. 2011. Life-cycle analysis on biodiesel production from microalgae: Water footprint and nutrients balance. Bioresource Technology, 102, 159-165.

YUAN, Z., BI, J. & MORIGUICHI, Y. 2006. The Circular Economy: A New Development Strategy in China. Journal of Industrial Ecology, 10, 4-8.

ZALASIEWICZ, J., WILLIAMS, M., HAYWOOD, A. & ELLIS, M. 2011. The Anthropocene: a new epoch of geological time? Philosophical Transactions of the Royal Society A: Mathematical,                                             Physical and Engineering Sciences, 369, 835-841.

ZHANG, X., JIANG, X. & SUN, C. 1999. Micro-stereolithography of polymeric and ceramic microstructures. Sensors and Actuators A: Physical, 77, 149-156.

ZHIJUN, F. & NAILING, Y. 2007. Putting a circular economy into practice in China. Sustainability Science, 2, 95-101.

ZHU, D. 1998. Sustainable development calls for circular economy. Science and Technology Journal,(9), 39-42.

ZUNIGA, J., KATSAVELIS, D., PECK, J., STOLLBERG, J., PETRYKOWSKI, M., CARSON, A. & FERNANDEZ, C. 2015. Cyborg beast: a low-cost 3d-printed prosthetic hand for children with upper-limb differences. BMC Research Notes, 8, 10.